The micro grids focus on the islanded mode of the micro grid with the control strategies for both the DG units and the active loads. The Dg unit’s uses voltage-based droop controllers for power balancing and sharing b/w multiple units. These controllers provide the primary control in the islanded micro grid without communications, which increase the reliability of the system The droop controller is based n the mainly resistive line parameters of the low voltage micro grid and lack of rotating inertia. The paper focuses on the islanded operation of the micro grid, with the control strategies for both the DG units and active load. The DG unit use voltage-based droop controller for power balancing and sharing between multiple units. The controller provides the primary control in the islanded micro grid without communication which increase the reliability of the system. An active load control strategy integrated in the micro grid can offer the needed flexibility and change the current load following control to a more generation following strategy, which burdens the DG units less and avoids frequently changing the power of the renewable energy sources from their optimal operating point.
Published in | International Journal of Energy and Power Engineering (Volume 10, Issue 5) |
DOI | 10.11648/j.ijepe.20211005.13 |
Page(s) | 96-101 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Distributed Generation, Smart Micro Grid, PCC (Point of Common Coupling)
[1] | H. Farhangi, The path of the smart grid, in IEEE Power & Energy Magazine, vol. 8, n0. 1, pp. 18-28, Jan/Feb 2020. |
[2] | K. Siri, C. Q. Lee, and T. f Wiu, “Current Distribution control in parallel connected converters for parallel connected converter’s part ii”, IEEE trans. Aerosp. Electron, Syst, vol 28, no. 3, pp. 841-851, July 1992. |
[3] | J. Banda and K. Siri, “Improved Central Limit control for parallel operation of DC -Dc power converters” in IEEE Power Electronics Specialists Conference (PESc 95), Atlanata, USA, Jun. 18-22, 1995, pp. 1104-1110. |
[4] | M. Prodanovic, and T. C Green, “High -quality power generation through distributed control of a power park micro grid”, IEEE Trans. Ind. Electron, vol. 53, no. 5, pp. 1471-1482, Oct-2006. |
[5] | k. Siri, C. Q. lee, and T. f. Wu, “Current Distribution control for parallel connected converter part I”, IEEE Trans. Aerosp. Electron. Syst,. vol. 28, no. 3 pp. 829-840, July 1992. |
[6] | J-F Chenand C-L., Chu, Combination voltage-controlled and current controlled “PWM inverter UPS parallel operation”, IEEE Trans. Ind. Electron, vol. 10. no. 5 pp-547-558, Sept-1995. |
[7] | J. F, Chen and C-L Chu, “Combination voltage controlled and current controlled PWM inverters for UPS Parallel operation”, IEEE Trans, Ind. Electron, vol. 10, pp-547-558, Sept 1995. |
[8] | M. C Chandorkar, D. M. Divan and R. Adapa, “Control of parallel connected inverters in standalone ac supply system”, IEEE Trans, Ind. Appl, vol. 29. n0. 1, pp. 136-143 an/Feb 1993. |
[9] | J. M, Guerrero, J. Mattas, L, Garcia de Vicuna, M. Castilla, and J. Mirret, “Wireless -control strategy for parallel operation distributed -generations inverters”, IEEE Trans. Ind. Electron., vol. 53, no. 5, pp. 1461-1470, Oct. 2006. |
[10] | R. H. Laster and P. Piagi, “Microgrid: A conceptual solution”, in Proc. IEEE Power Electron. Spec. Conf. (PECS 2004), Anchen, Germany., 2004. |
[11] | J. A Pecas Lopes Moereira, and A. G Madureira, “Defining Control strategies for micro grids in islanded”, IEEE Trans. Power. Syst., vol. 21, no. 2, pp. 916-924, 2006. |
[12] | H. Laaksonen, P. Saari, and R. Komulainen, “Voltage and frequency control of inverter-based LV network micro grid”, In 2005. International Conference on Future Power Systems, Amsterdam, Nov. 18, 2005. |
[13] | A. Engler, O. Osika, M. Barnes, and N. Hatriargyriou, DBs2 Evaluation of the local controller strategies. www.microgrids.eu/micro2000, Jan. 2005. |
[14] | J. M. Guerrero, L. Garcia de Vichuia, J. Matas, M. Castilla, and J. Miret, “Output impedances design of parallel connected ups inverter with wireless load sharing control”, IEEE Trans. Ind. Electron., vol. 52, n0. 4, pp. 1126-1135, Aug 2005. |
[15] | W. Yao, M. Chen, J. M. Guerrero, and Z-M. Qian, “Design and analysis of the droop control method for parallel inverts considering the impact of the complex impedances on the power sharing”, IEEE Trans. Ind., Electron., vol. 58, no. 2, pp. 576-588, Feb 2011. |
[16] | J. M Guerrero, J. Matats, L. Garcia de Vichua, M. Castilla, and J. Mirret, “Decentralized control for parallel operation of distributed generations inverters using resistive output impedances”, IEEE Trans., Ind. Electron., vol. 54, no. 2, pp. 994-1004, Apr. 2007. |
[17] | J. M. Guerrero, J. Mattas, L. Garcia J. C Vasquez, and L. Garcia de Vichua, “Control Startegy for flexible micro grid based on parallel line interactive UPS system”, IEEE Trans. ind., Electron. vol. 56, n0. 3, pp. 726-736. March. 2009. |
[18] | Y. Mohammed and E. F., El-Saadany, “Adaptive decentralized droop controller to preserve power sharing stability for paralleled inverter in distributed generation micro grids,” IEEE., Trans. Power Electronics., vol. 23., no. 6, pp. 2806-2816., Nov. 2008. |
[19] | T. L Vandoorn, B. Meesrsman, L. Degroote, B. Renders, and L. Vandevelde. “A control Startegy for islanded micro grids with dc links voltage control”, IEEE Trans. Power. Del, vol 26, n0. 2, pp. 703-713, April 2011. |
[20] | T. L Vandoorn, B. Meesrsman, L. Degroote, B. Meersman, and L. Vandevelde. “Active in load control in islanded microgrids based on the grid voltge”, IEEE Trans. On Smart Grid, vol., 2. no. 1, pp 139-151, Mar. 2011. |
[21] | J. M. Guerrero, J. C Visquez., J. Matas, L. Garcia de Virchua, and M. Castilla, “Hierarchical control of Droop controlled Ac and Dc micro grids. A general approach towards standardization”, IEEE Trans. Ind. Electron, vol. 58, no. 1, pp. 158-172, Jan 2011. |
APA Style
Mamta Chamoli, Manoj Panda, Vishnu Mohan Mishra. (2021). Voltage Based Control of DG Units in Smart Micro Grids. International Journal of Energy and Power Engineering, 10(5), 96-101. https://doi.org/10.11648/j.ijepe.20211005.13
ACS Style
Mamta Chamoli; Manoj Panda; Vishnu Mohan Mishra. Voltage Based Control of DG Units in Smart Micro Grids. Int. J. Energy Power Eng. 2021, 10(5), 96-101. doi: 10.11648/j.ijepe.20211005.13
AMA Style
Mamta Chamoli, Manoj Panda, Vishnu Mohan Mishra. Voltage Based Control of DG Units in Smart Micro Grids. Int J Energy Power Eng. 2021;10(5):96-101. doi: 10.11648/j.ijepe.20211005.13
@article{10.11648/j.ijepe.20211005.13, author = {Mamta Chamoli and Manoj Panda and Vishnu Mohan Mishra}, title = {Voltage Based Control of DG Units in Smart Micro Grids}, journal = {International Journal of Energy and Power Engineering}, volume = {10}, number = {5}, pages = {96-101}, doi = {10.11648/j.ijepe.20211005.13}, url = {https://doi.org/10.11648/j.ijepe.20211005.13}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20211005.13}, abstract = {The micro grids focus on the islanded mode of the micro grid with the control strategies for both the DG units and the active loads. The Dg unit’s uses voltage-based droop controllers for power balancing and sharing b/w multiple units. These controllers provide the primary control in the islanded micro grid without communications, which increase the reliability of the system The droop controller is based n the mainly resistive line parameters of the low voltage micro grid and lack of rotating inertia. The paper focuses on the islanded operation of the micro grid, with the control strategies for both the DG units and active load. The DG unit use voltage-based droop controller for power balancing and sharing between multiple units. The controller provides the primary control in the islanded micro grid without communication which increase the reliability of the system. An active load control strategy integrated in the micro grid can offer the needed flexibility and change the current load following control to a more generation following strategy, which burdens the DG units less and avoids frequently changing the power of the renewable energy sources from their optimal operating point.}, year = {2021} }
TY - JOUR T1 - Voltage Based Control of DG Units in Smart Micro Grids AU - Mamta Chamoli AU - Manoj Panda AU - Vishnu Mohan Mishra Y1 - 2021/10/30 PY - 2021 N1 - https://doi.org/10.11648/j.ijepe.20211005.13 DO - 10.11648/j.ijepe.20211005.13 T2 - International Journal of Energy and Power Engineering JF - International Journal of Energy and Power Engineering JO - International Journal of Energy and Power Engineering SP - 96 EP - 101 PB - Science Publishing Group SN - 2326-960X UR - https://doi.org/10.11648/j.ijepe.20211005.13 AB - The micro grids focus on the islanded mode of the micro grid with the control strategies for both the DG units and the active loads. The Dg unit’s uses voltage-based droop controllers for power balancing and sharing b/w multiple units. These controllers provide the primary control in the islanded micro grid without communications, which increase the reliability of the system The droop controller is based n the mainly resistive line parameters of the low voltage micro grid and lack of rotating inertia. The paper focuses on the islanded operation of the micro grid, with the control strategies for both the DG units and active load. The DG unit use voltage-based droop controller for power balancing and sharing between multiple units. The controller provides the primary control in the islanded micro grid without communication which increase the reliability of the system. An active load control strategy integrated in the micro grid can offer the needed flexibility and change the current load following control to a more generation following strategy, which burdens the DG units less and avoids frequently changing the power of the renewable energy sources from their optimal operating point. VL - 10 IS - 5 ER -