Simulation and Modelling of a Turbocharged Compression Ignition Engine

Brahim Menacer; Mostefa Bouchetara

doi:doi:10.11648/j.ijepe.20150403.12

| Peer-Reviewed

Simulation and Modelling of a Turbocharged Compression Ignition Engine

Brahim Menacer, Mostefa Bouchetara

Published in International Journal of Energy and Power Engineering (Volume 4, Issue 3)

Received: 13 February 2015 Accepted: 1 March 2015 Published: 12 May 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The increase in fuel price is constraining car manufacturers to produce highly efficient engines with more regulations in terms of pollutant emissions. The increasing complexity of modern engines has rendered the prototyping phase long and expensive. This is where engine modeling becomes in the recent years extremely useful and can be used as an indispensable tool when developing new engine concepts. This study deals with the numerical simulation and performance prediction of a turbocharged diesel engine with direct injection. To predict the engine performances, we developed a computer program for simulating the operation of a turbocharged diesel engine, and used the commercial GT-Power software to validate the simulation results. In this work we carried out a comparative study of indicated mean effective pressure, mean effective pressure, power, torque and brake specific fuel consumption obtained by the analytical model for thermodynamic cycle simulation of a turbocharged diesel engine with the computer program developed in the language FORTRAN and those with the GT-Power software. The language FORTRAN program developed is currently used in the course of modeling and simulation of engine performance.

Published in	International Journal of Energy and Power Engineering (Volume 4, Issue 3)
DOI	10.11648/j.ijepe.20150403.12
Page(s)	129-145
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

One Zone Model, Ignition Compression Engine, Heat Transfer, Friction, Turbocharged Diesel Engine, GT-Power

References

[1]	P. A. Hazell and J. O. Flower; Sampled-data theory applied to the modeling and control analysis of compression ignition engines – Part 1;International Journal of Control, pp. 549–562, 1971.
[2]	D. Descieux and M. Feidt; One zone thermodynamic model simulation of an ignition compression engine, Applied Thermal Engineering, vol. 27, pp 1457–1466, 2007.
[3]	N. Watson, A. D. Pilley and M. Marzouk; a combustion correlation for diesel engine simulation. SAE Technical Paper, (800029), 1980.
[4]	O. Grondin, R. K. Stobart, H. Chafouk and J. Maquet; Modelling the compression ignition engine for control; review and future trends, SAE Paper, 2004-01-0423, 2004.
[5]	A.Nafis; Evaluation of different types of friction to improve the performance of a direct injection diesel engine; Journal of Energy and Environment, 2004, pp. 33-47.
[6]	G. F. Hohenberg; Advanced approaches for heat transfer calculations, SAE Paper (1979), No. 790825.
[7]	P. Gunter, Christian Schwarz, Gunnar Stiesch and Frank Otto; simulation combustion and pollutant formation for engine-development; springer-verlag berlin Heidelberg, 2006.
[8]	A. Sanli, A. N. Ozsezen, I. Kilicaslan and M. Canakci; The influence of engine speed and load on the heat transfer between gases and in-cylinder walls at fired and motored conditions of an IDI diesel engine; Applied Thermal Engineering, vol. 28, No. 11-12, pp. 1395-1404, 2008.
[9]	Robert Bosch GmbH, Automotive Handbook, 8th ed.; Plochingen: John Wiley and Sons, 2011.
[10]	A. Sakhrieh; Computational thermodynamic analysis of compression ignition engine; International Communications in Heat and Mass Transfer; No. 37, PP. 299–303, 2010.
[11]	J. B. Heywood; Internal combustion engine fundamentals, McGraw-Hill, Newyork, 1988.
[12]	C.D. Rakopoulos, D.C. Rakopoulos, G.C. Mavropoulos and E.G. Giakoumis; Experimental and theoretical study of the short-term response temperature transientsin the cylinder walls of a diesel engine at various operating conditions; Applied Thermal Engineering;2004,pp. 679-702.
[13]	R. Stone; Introduction to Internal Combustion Engines, Society of Automotive Engineers, Warrendale, 2d edition, 1995.
[14]	R. B. Krieger and G. L. Borman; The computation of apparent heat release for internal combustion engines, Proceedings of Diesel Gas Power, ASME (1966), No. 66-WA/DGP-4.
[15]	N. Watson and M. S. Janota; Turbocharging the internal combustion engine; The Macmillan Press, New York, 1982.
[16]	T.K. Gogoi and D.C. Baruah; A cycle simulation model for predicting the performance of a diesel engine fuelled by diesel and biodiesel blends; Energy, N° 35.2010, pp. 1317–1323.
[17]	Kumar SV and Minkowycz WJ; Numerical Simulation of the thermodynamic fluid flow and heat transfer processes in a diesel engine; Numerical Heat Transfer, Part A.1990.pp.17-143.
[18]	Rakopoulos CD and Giakoumis EG; Simulation and exergy analysis of transient diesel engine operation; Energy; N° 22, 1997.pp. 875–885.
[19]	Z. Bazari and S. H. Chan; Diesel engine thermodynamic simulation: current status and future developments; The Mechanical Engineer 1992, pp.25-32.
[20]	S. H. Chan, Y. He and J. H. Sun; Prediction of transient nitric oxide in diesel exhaust; Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 1999, pp. 213- 327.
[21]	Gamma Technologies, GT-Power User’sManual, GT-Suite Version 7.0, 2009.
[22]	J. Galindo, F. J. Arnau, A. Tiseira and P. Piqueras; Solution of the Turbocompressor Boundary Condition for One-Dimensional Gas-Dynamic Codes; Mathematical and Computer Modelling, vol. 52, No. 7-8, pp. 1288-1297, 2010.
[23]	E, Hendricks and S.C, Sorenson; Mean value modeling of spark ignition engines, SAE technical paper series, 900616, 1990.

Cite This Article

Plain Text BibTeX RIS

APA Style

Brahim Menacer, Mostefa Bouchetara. (2015). Simulation and Modelling of a Turbocharged Compression Ignition Engine. International Journal of Energy and Power Engineering, 4(3), 129-145. https://doi.org/10.11648/j.ijepe.20150403.12

Copy | Download

ACS Style

Brahim Menacer; Mostefa Bouchetara. Simulation and Modelling of a Turbocharged Compression Ignition Engine. Int. J. Energy Power Eng. 2015, 4(3), 129-145. doi: 10.11648/j.ijepe.20150403.12

Copy | Download

AMA Style

Brahim Menacer, Mostefa Bouchetara. Simulation and Modelling of a Turbocharged Compression Ignition Engine. Int J Energy Power Eng. 2015;4(3):129-145. doi: 10.11648/j.ijepe.20150403.12

Copy | Download

@article{10.11648/j.ijepe.20150403.12,
  author = {Brahim Menacer and Mostefa Bouchetara},
  title = {Simulation and Modelling of a Turbocharged Compression Ignition Engine},
  journal = {International Journal of Energy and Power Engineering},
  volume = {4},
  number = {3},
  pages = {129-145},
  doi = {10.11648/j.ijepe.20150403.12},
  url = {https://doi.org/10.11648/j.ijepe.20150403.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20150403.12},
  abstract = {The increase in fuel price is constraining car manufacturers to produce highly efficient engines with more regulations in terms of pollutant emissions. The increasing complexity of modern engines has rendered the prototyping phase long and expensive. This is where engine modeling becomes in the recent years extremely useful and can be used as an indispensable tool when developing new engine concepts. This study deals with the numerical simulation and performance prediction of a turbocharged diesel engine with direct injection. To predict the engine performances, we developed a computer program for simulating the operation of a turbocharged diesel engine, and used the commercial GT-Power software to validate the simulation results. In this work we carried out a comparative study of indicated mean effective pressure, mean effective pressure, power, torque and brake specific fuel consumption obtained by the analytical model for thermodynamic cycle simulation of a turbocharged diesel engine with the computer program developed in the language FORTRAN and those with the GT-Power software. The language FORTRAN program developed is currently used in the course of modeling and simulation of engine performance.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Simulation and Modelling of a Turbocharged Compression Ignition Engine
AU  - Brahim Menacer
AU  - Mostefa Bouchetara
Y1  - 2015/05/12
PY  - 2015
N1  - https://doi.org/10.11648/j.ijepe.20150403.12
DO  - 10.11648/j.ijepe.20150403.12
T2  - International Journal of Energy and Power Engineering
JF  - International Journal of Energy and Power Engineering
JO  - International Journal of Energy and Power Engineering
SP  - 129
EP  - 145
PB  - Science Publishing Group
SN  - 2326-960X
UR  - https://doi.org/10.11648/j.ijepe.20150403.12
AB  - The increase in fuel price is constraining car manufacturers to produce highly efficient engines with more regulations in terms of pollutant emissions. The increasing complexity of modern engines has rendered the prototyping phase long and expensive. This is where engine modeling becomes in the recent years extremely useful and can be used as an indispensable tool when developing new engine concepts. This study deals with the numerical simulation and performance prediction of a turbocharged diesel engine with direct injection. To predict the engine performances, we developed a computer program for simulating the operation of a turbocharged diesel engine, and used the commercial GT-Power software to validate the simulation results. In this work we carried out a comparative study of indicated mean effective pressure, mean effective pressure, power, torque and brake specific fuel consumption obtained by the analytical model for thermodynamic cycle simulation of a turbocharged diesel engine with the computer program developed in the language FORTRAN and those with the GT-Power software. The language FORTRAN program developed is currently used in the course of modeling and simulation of engine performance.
VL  - 4
IS  - 3
ER  -

Copy | Download

Author Information

Brahim Menacer

Aeronautics and Systems Propelling Laboratory, Department of Mechanical Engineering, University of Sciences and the Technology of Oran, L.P 1505 El -Menaouer, Oran, Algeria
Mostefa Bouchetara

Aeronautics and Systems Propelling Laboratory, Department of Mechanical Engineering, University of Sciences and the Technology of Oran, L.P 1505 El -Menaouer, Oran, Algeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Brahim Menacer, Mostefa Bouchetara. (2015). Simulation and Modelling of a Turbocharged Compression Ignition Engine. International Journal of Energy and Power Engineering, 4(3), 129-145. https://doi.org/10.11648/j.ijepe.20150403.12

Copy | Download

ACS Style

Brahim Menacer; Mostefa Bouchetara. Simulation and Modelling of a Turbocharged Compression Ignition Engine. Int. J. Energy Power Eng. 2015, 4(3), 129-145. doi: 10.11648/j.ijepe.20150403.12

Copy | Download

AMA Style

Brahim Menacer, Mostefa Bouchetara. Simulation and Modelling of a Turbocharged Compression Ignition Engine. Int J Energy Power Eng. 2015;4(3):129-145. doi: 10.11648/j.ijepe.20150403.12

Copy | Download

@article{10.11648/j.ijepe.20150403.12,
  author = {Brahim Menacer and Mostefa Bouchetara},
  title = {Simulation and Modelling of a Turbocharged Compression Ignition Engine},
  journal = {International Journal of Energy and Power Engineering},
  volume = {4},
  number = {3},
  pages = {129-145},
  doi = {10.11648/j.ijepe.20150403.12},
  url = {https://doi.org/10.11648/j.ijepe.20150403.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20150403.12},
  abstract = {The increase in fuel price is constraining car manufacturers to produce highly efficient engines with more regulations in terms of pollutant emissions. The increasing complexity of modern engines has rendered the prototyping phase long and expensive. This is where engine modeling becomes in the recent years extremely useful and can be used as an indispensable tool when developing new engine concepts. This study deals with the numerical simulation and performance prediction of a turbocharged diesel engine with direct injection. To predict the engine performances, we developed a computer program for simulating the operation of a turbocharged diesel engine, and used the commercial GT-Power software to validate the simulation results. In this work we carried out a comparative study of indicated mean effective pressure, mean effective pressure, power, torque and brake specific fuel consumption obtained by the analytical model for thermodynamic cycle simulation of a turbocharged diesel engine with the computer program developed in the language FORTRAN and those with the GT-Power software. The language FORTRAN program developed is currently used in the course of modeling and simulation of engine performance.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Simulation and Modelling of a Turbocharged Compression Ignition Engine
AU  - Brahim Menacer
AU  - Mostefa Bouchetara
Y1  - 2015/05/12
PY  - 2015
N1  - https://doi.org/10.11648/j.ijepe.20150403.12
DO  - 10.11648/j.ijepe.20150403.12
T2  - International Journal of Energy and Power Engineering
JF  - International Journal of Energy and Power Engineering
JO  - International Journal of Energy and Power Engineering
SP  - 129
EP  - 145
PB  - Science Publishing Group
SN  - 2326-960X
UR  - https://doi.org/10.11648/j.ijepe.20150403.12
AB  - The increase in fuel price is constraining car manufacturers to produce highly efficient engines with more regulations in terms of pollutant emissions. The increasing complexity of modern engines has rendered the prototyping phase long and expensive. This is where engine modeling becomes in the recent years extremely useful and can be used as an indispensable tool when developing new engine concepts. This study deals with the numerical simulation and performance prediction of a turbocharged diesel engine with direct injection. To predict the engine performances, we developed a computer program for simulating the operation of a turbocharged diesel engine, and used the commercial GT-Power software to validate the simulation results. In this work we carried out a comparative study of indicated mean effective pressure, mean effective pressure, power, torque and brake specific fuel consumption obtained by the analytical model for thermodynamic cycle simulation of a turbocharged diesel engine with the computer program developed in the language FORTRAN and those with the GT-Power software. The language FORTRAN program developed is currently used in the course of modeling and simulation of engine performance.
VL  - 4
IS  - 3
ER  -

Copy | Download