Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission

Bourdillon O. Omijeh; Tedje Oteheri

doi:doi:10.11648/j.cssp.20160503.11

| Peer-Reviewed

Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission

Bourdillon O. Omijeh, Tedje Oteheri

Published in Science Journal of Circuits, Systems and Signal Processing (Volume 5, Issue 3)

Received: 23 August 2016 Accepted: 5 September 2016 Published: 19 October 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper focuses on the Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission with the following objectives:(i) to design a BPSK system (ii) to show the modulation and demodulation of a BPSK technique through a noiseless channel and (iii) to show the modulation and demodulation of the same technique through a noisy channel. A model-based design methodology was employed in this work. The entire idea was modelled in Matlab/Simulink environment. The results obtained after analysis and simulation show good system design and specifications. Demodulated bits will be in error if transmission channel is noisy.

Published in	Science Journal of Circuits, Systems and Signal Processing (Volume 5, Issue 3)
DOI	10.11648/j.cssp.20160503.11
Page(s)	24-30
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

BPSK, Digital Modulation, Noisy Transmission, Matlab/Simulink

References

[1]	Y. Rosmansyah, P. Sweeney, R. Tafazolli, “Air-Interface Techniques for Achieving High Data Rates for UMTS.
[2]	A.S. Madhukumar, Francois Chin, “An Efficient Method for High-Rate Data Transmission Using Residue Number System Based Ds-Cdma”, IEEE.
[3]	Min-Yan Song, Yang Xiao, Joachim Habermann, “High Data Rate Wireless System”, IEEE, Pp. 1344-1350.
[4]	Haifeng Wang, Zhenhong Li, “Novel Soft-Bit Demodulator with Multi-Dimensional Projection for High-Order Modulation”, IEEE, Pp. 2051-2054, 2002.
[5]	Troels Emil Kolding, Klaus Ingemann Pedersen, JeroenWigard, Frank Frederiksen, PrebenElgaard. Mogensen, “High Speed Downlink Packet Access (Hsdpa): W-Cdma Evolution”, IEEE Vehicular Technology Society News, February, 2003.
[6]	Simon Haykin,” Digital Communication” Edition, 2006.
[7]	Aun Ali TahirFeng Zhao “Performance Analysis on Modulation Techniques of W- Cdma in Multipath Fading Channel” Electrical Engineering Blekinge Institute of Technology January 2009.
[8]	G. Tharakanatha, SK. Mahaboobkamal basha, Vijay Bhaskar chanda, I. Hemalatha (2013):Implementation and Bit Error Rate analysis of BPSK Modulation and Demodulation Technique using MATLAB, International Journal of Engineering Trends and Technology (IJETT) – Volume 4 Issue 9- Sep 2013.pp:4010-4014.
[9]	Weizheng. W (1997): Simulink Communication Toolbox, Mathworks, Inc. http:www.mathwork.com
[10]	Omijeh.B.O (2016): Applied Engineering Mathematics withMatlab/Simulink, M & J Grand Orbit Communications Ltd, Port Harcourt, 2016; PP:201-203.
[11]	Jeffery.S.B and Gary.M.M (2008):Modern Electronic Communication, Prentice-Hall of India Private Ltd, New-Delhi-110001; PP:466-470.

Cite This Article

Plain Text BibTeX RIS

APA Style

Bourdillon O. Omijeh, Tedje Oteheri. (2016). Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission. Science Journal of Circuits, Systems and Signal Processing, 5(3), 24-30. https://doi.org/10.11648/j.cssp.20160503.11

Copy | Download

ACS Style

Bourdillon O. Omijeh; Tedje Oteheri. Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission. Sci. J. Circuits Syst. Signal Process. 2016, 5(3), 24-30. doi: 10.11648/j.cssp.20160503.11

Copy | Download

AMA Style

Bourdillon O. Omijeh, Tedje Oteheri. Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission. Sci J Circuits Syst Signal Process. 2016;5(3):24-30. doi: 10.11648/j.cssp.20160503.11

Copy | Download

@article{10.11648/j.cssp.20160503.11,
  author = {Bourdillon O. Omijeh and Tedje Oteheri},
  title = {Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission},
  journal = {Science Journal of Circuits, Systems and Signal Processing},
  volume = {5},
  number = {3},
  pages = {24-30},
  doi = {10.11648/j.cssp.20160503.11},
  url = {https://doi.org/10.11648/j.cssp.20160503.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.cssp.20160503.11},
  abstract = {This paper focuses on the Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission with the following objectives:(i) to design a BPSK system (ii) to show the modulation and demodulation of a BPSK technique through a noiseless channel and (iii) to show the modulation and demodulation of the same technique through a noisy channel. A model-based design methodology was employed in this work. The entire idea was modelled in Matlab/Simulink environment. The results obtained after analysis and simulation show good system design and specifications. Demodulated bits will be in error if transmission channel is noisy.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission
AU  - Bourdillon O. Omijeh
AU  - Tedje Oteheri
Y1  - 2016/10/19
PY  - 2016
N1  - https://doi.org/10.11648/j.cssp.20160503.11
DO  - 10.11648/j.cssp.20160503.11
T2  - Science Journal of Circuits, Systems and Signal Processing
JF  - Science Journal of Circuits, Systems and Signal Processing
JO  - Science Journal of Circuits, Systems and Signal Processing
SP  - 24
EP  - 30
PB  - Science Publishing Group
SN  - 2326-9073
UR  - https://doi.org/10.11648/j.cssp.20160503.11
AB  - This paper focuses on the Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission with the following objectives:(i) to design a BPSK system (ii) to show the modulation and demodulation of a BPSK technique through a noiseless channel and (iii) to show the modulation and demodulation of the same technique through a noisy channel. A model-based design methodology was employed in this work. The entire idea was modelled in Matlab/Simulink environment. The results obtained after analysis and simulation show good system design and specifications. Demodulated bits will be in error if transmission channel is noisy.
VL  - 5
IS  - 3
ER  -

Copy | Download

Author Information

Bourdillon O. Omijeh

Department of Electronic and Computer Engineering, University of Port Harcourt,Port Harcourt, Nigeria
Tedje Oteheri

Centre for Information and Telecommunication Engineering, University of Port Harcourt, Port Harcourt, Nigeria

Download PDF

Submit an Article

Sections

Plain Text BibTeX RIS

APA Style

Bourdillon O. Omijeh, Tedje Oteheri. (2016). Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission. Science Journal of Circuits, Systems and Signal Processing, 5(3), 24-30. https://doi.org/10.11648/j.cssp.20160503.11

Copy | Download

ACS Style

Bourdillon O. Omijeh; Tedje Oteheri. Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission. Sci. J. Circuits Syst. Signal Process. 2016, 5(3), 24-30. doi: 10.11648/j.cssp.20160503.11

Copy | Download

AMA Style

Bourdillon O. Omijeh, Tedje Oteheri. Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission. Sci J Circuits Syst Signal Process. 2016;5(3):24-30. doi: 10.11648/j.cssp.20160503.11

Copy | Download

@article{10.11648/j.cssp.20160503.11,
  author = {Bourdillon O. Omijeh and Tedje Oteheri},
  title = {Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission},
  journal = {Science Journal of Circuits, Systems and Signal Processing},
  volume = {5},
  number = {3},
  pages = {24-30},
  doi = {10.11648/j.cssp.20160503.11},
  url = {https://doi.org/10.11648/j.cssp.20160503.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.cssp.20160503.11},
  abstract = {This paper focuses on the Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission with the following objectives:(i) to design a BPSK system (ii) to show the modulation and demodulation of a BPSK technique through a noiseless channel and (iii) to show the modulation and demodulation of the same technique through a noisy channel. A model-based design methodology was employed in this work. The entire idea was modelled in Matlab/Simulink environment. The results obtained after analysis and simulation show good system design and specifications. Demodulated bits will be in error if transmission channel is noisy.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission
AU  - Bourdillon O. Omijeh
AU  - Tedje Oteheri
Y1  - 2016/10/19
PY  - 2016
N1  - https://doi.org/10.11648/j.cssp.20160503.11
DO  - 10.11648/j.cssp.20160503.11
T2  - Science Journal of Circuits, Systems and Signal Processing
JF  - Science Journal of Circuits, Systems and Signal Processing
JO  - Science Journal of Circuits, Systems and Signal Processing
SP  - 24
EP  - 30
PB  - Science Publishing Group
SN  - 2326-9073
UR  - https://doi.org/10.11648/j.cssp.20160503.11
AB  - This paper focuses on the Binary Phase Shift Keying Digital Modulation Technique for Noiseless and Noisy Transmission with the following objectives:(i) to design a BPSK system (ii) to show the modulation and demodulation of a BPSK technique through a noiseless channel and (iii) to show the modulation and demodulation of the same technique through a noisy channel. A model-based design methodology was employed in this work. The entire idea was modelled in Matlab/Simulink environment. The results obtained after analysis and simulation show good system design and specifications. Demodulated bits will be in error if transmission channel is noisy.
VL  - 5
IS  - 3
ER  -

Copy | Download