Editorial Board Members (99)
-
Dr. Lerato Hlekelele
Department of Chemicals, Council for Scientific and Industrial Research, Pretoria, South Africa
-
Prof. Shujie Jiao, PhD
School of Materials Science and Engineering , Harbin Institute of Technology, Harbin, China
-
Assoc. Prof. Xiangkai Kong, PhD
Department of New Energy Materials and Devices, China University of Mining and Technology, Xuzhou, China
-
Dr. Zhiyong Sun
College of Biotechnology and Bioengineering, Zhejiang University of Technology, Hangzhou, China
-
Dr. Sreeram P R
Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India
-
Dr. Yang Yang
Department of Materials Science and Engineering, University of Florida, Gainesville, United States
-
Dr. Flavia da Cruz Gallo
Department of Materials Science and Engineering, University of Florida, Gainesville, United States
-
Dr. Feng Gao
Special Polymer Research Institute, Institute of Zhejiang University –Quzhou, Quzhou, China
-
Dr. Kalaiselvan Ganesan
Department of Physics, University of Cambridge, Cambridge, United Kingdom
-
Assoc. Prof. Xingda An, PhD
Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou, China
-
Dr. Rahul Majee
Department of Chemistry, University of St Andrews, St Andrews, United Kingdom
-
Dr. Aniruddha Molla
Department of Chemical Engineering, Inha University, Incheon, South Korea
-
Prof. Shobha Waghmode, PhD
Department of Chemistry, MES Abasaheb Garware College, Pune, Pune, India
-
Assoc. Prof. Renxing Lin, PhD
College of Engineering and Applied Sciences, Nanjing University, Nanjing, China
-
Assist. Prof. Pallab Bhattacharya
Functional Materials Group Advanced Materials and Processes Division, Council of Scientific and Industrial Research -National Metallurgical Laboratory, Jamshedpur, India
-
Licong An
School of Materials Engineering, Purdue University, West Lafayette, United States
-
Yuchu Liu
Department of Polymer Science and Polymer Engineering, University of Akron, Akron, United States
-
G. Sunita Sundari
Department of Physics, Koneru Lakshmaiah Educational Foundation, Vaddeswaram, India
-
Assoc. Prof. Józef Iwaszko
Department of Materials Engineering, Czestochowa University of Technology, Czestochowa, Poland
-
Ankush Kumar Tangra
Department of Physics, Sant Baba Bhag Singh University Jalandhar, Jalandhar, India
-
Aparna Dixit
Department of Physics, Pranveer Singh Institute of Technology, Kanpur, Kanpur, India
-
Litao Han
School of Materials, Henan University, Kaifeng, China
-
Ashraf Uddin
School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, Australia
-
Dr. Rabia Khatoon
Department of Renewable Energies, Africa New Energies, London, United Kingdom
-
Assist. Prof. Santanu Chakraborty, PhD
Department of Physics, National Institute of Technology Agartala, Agartala, India
-
Ni Yang
Department of Mechanical &Aerospace Engineering, North Carolina State University, Raleigh, United States
-
Zahida Malik
School of Chemistry, University of Southampton, Southampton, United Kingdom
-
Mohammad Mianroodi
Department of Mechanical Engineering, University of Strasbourg, Strasbourg, France
-
Gilberto Pavani
Federal Institute of Rio Grande do Sul, Bento Gonçalves, Brazil
-
Aliouat Mouaad Yassine
Department of Physics, Institut Matériaux Microélectronique Nanosciences de Provence, Aix-Marseille University, Marseille, France
-
Zhenghua Tang
Department of Metallic Materials, School of Materials Science and Engineering, Sichuan University, Chengdu, China
-
Assist. Prof. Md. Motin Seikh, PhD
Department of Chemistry, Visva-Bharati University, Santiniketan, India
-
Mehrdad Rostami Osanloo
Department of Physics, The University of Texas at Dallas, Richardson, United States
-
Halil Murat Enginsoy
Mechanical and Manufacturing Engineering School, Supmeca-Paris/Quartz-France, Paris, France
-
Shobhnath Gupta
Department of Chemistry, Indian Institute of Technology Bombay, Mumbai, India
-
Ashutosh Kumar
Institut de Chimie Moléculaire et des Matériaux d'Orsay, University of Paris Saclay, Orsay, France
-
Haitao Zhang
School of Materials Science and Engineering, Southwest Jiaotong university, Chengdu, China
-
Charoen Nakason
Prince of Songkla University, Surat Thani, Thailand
-
Sharath B.N
Department of mechanical Engineering, Malnad College of Engineering, Hassan, India
-
Vediyappan Thirumal
School of Mechanical Engineering, Yeungnam University, Daegu, South Korea
-
Bachir Yaou Balarabe
Department of Nanotechnology, School of Engineering and Technology, National Forensic Sciences University, Gandhinagar, India
-
Sarah Mendes
Department of Engineering, UERJ - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, Brazil
-
Tingping Hou
College of Science, Wuhan University of Science and Technology, Wuhan, China
-
Tian Tian
Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh, United States
-
Lili Feng
College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin, China
-
Beko Mesic
Department of Engineering and Chemical Sciences, Karlstad University, Karlstad, Sweden
-
Dr. Dineshkumar Sengottuvelu
Center for Graphene Research and Innovation, University of Mississippi, Oxford, United States
-
Adityanarayan Pandey
Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai, India
-
Shatabda Bhattacharya
Graduate School of Engineering Sciences, Osaka University, Osaka, Japan
-
Chang Liu
Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golde, United States
-
Dr. Hamid Pourasiabi
School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, Australia
-
Prof. Lucía Fabiola Cano Salazar, PhD
Department of Advanced Materials, Faculty of Chemical Sciences, Autonomous University of Coahuila, Saltillo, Mexico
-
Dr. Nagaraj S
Advanced Materials Laboratory, Council of Scientific and Industrial Research–Central Leather Research Institute, Chennai, India
-
Assoc. Prof. Shaohui Xiong, PhD
School of Materials Science and Engineering, Hunan University of Science and Technology, Xiangtan, China
-
Dr. Aniruddha Basu
Renewable and Sustainable Energy Institute, University of Colorado, Boulder, United States
-
Dr. Chenjing Yang
School of Engineering and Apllied Sciences, Harvard University, Boston, United States
-
Dr. Jobin Varghese
Hybrid Microsystems, Fraunhofer IKTS, Dresden, Germany
-
Dr. Wei Che
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology, Ulsan, South Korea
-
Assist. Prof. Vikash Mishra, PhD
Department of Physics, Manipal Institute of Technology, Manipal, India
-
Assoc. Prof. Manisha Singh, PhD
Department of Physics, Amity University Gwalior, Gwalior, India
-
Assoc. Prof. Boopathy Govindarajan, PhD
Department of Aeronautical Engineering, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Chennai, India
-
Assoc. Prof. Bo Zhang, PhD
School of Integrated Circuit, Beijing University of Posts and Telecommunications, Beijing, China
-
Dr. Junyi Che
Institute of Translational Medicine, Nanjing Drum Tower Hospital, Nanjing, China
-
Dr. Magdalena-Valentina Lungu
Department of Metallic, Composite and Polymeric Materials, National Institute for Research and Development in Electrical Engineering ICPE-CA (INCDIE ICPE – CA), Bucharest, Romania
-
Assist. Prof. Priyanka K P
Department of Physics, Ramaiah University of Applied Sciences, Bengaluru, India
-
Mojtaba Mansourianfar
CAS Key Laboratory for Nano-Bio Interface, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, China
-
Kun Tian
Department of Chemistry and Chemical Technologies of Pharmacy, Sapienza University of Rome, Rome, Italy
-
Lifeng Wang
Institute for Frontier Materials, Deakin University, Geelong, Australia
-
Gururaj Neelgund
Department of Chemistry, Prairie View A&M University, Prairie View, United States
-
Demet Demir Şahin
Mining Technology Program, Gümüşhane University, Gümüşhane, Turkey
-
Sivaprakash Paramasivam
Centre for High Pressure Research, Bharathidasan University, Tiruchirappalli, India
-
Dr. Loredana Judele
Department of Concrete Structures Building Materials Technology and Management, Technical University Gheorghe Asachi of Iasi, Iasi, Romania
-
Assoc. Prof. Qiang Zhu, PhD
Department of Physics, Yunnan University, Kunming, China
-
Vedat Çavuş
Department of Forestry Industrial Engineering, Faculty of Forestry, Izmir Katip Celebi University, İzmir, Turkey
-
Lisa Belkacemi
Leibniz-Institut für Werkstofforientierte Technologien – IWT, Bremen, Germany
-
Assoc. Prof. Nuno Calçada Loureiro
Department of Industrial Production Engineering, Instituto Superior de entre Douro e Vouga, Santa Maria Da Feira, Portugal
-
Lala Gahramanli
Faculty of Physics, Baku State University, Baku, Azerbaijan
-
Sekhar Babu Pendyala
Department of Mechanical Engineering, Narsimha Reddy Engineering College, Hyderabad, India
-
Fujuan Liu
College of Textile and Clothing Engineering, Soochow University, Suzhou, China
-
Alka Pareek
Research Laboratory of Chemical Film Technologies, Tallinn University of Technology, Tallinn, Estonia
-
Imène Hebbar
Department of Mechanical Engineering, University of Technologie, Mostaganem, Algeria
-
Wenhan Zhou
School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, China
-
Dan Wu
School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan, China
-
Prashanth Sandineni
Department of Chemistry, Missouri University of Science and Technology, Rolla, United States
-
Assoc. Prof. Yancheng Meng, PhD
Key Laboratory for Intelligent Nano Materials and Devices of the Ministry of Education, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China
-
Xiaolong Xu
College of Materials Science and Engineering, North University of China, Taiyuan, China
-
Nabil Hebbar
Department of Architecture, Faculty of science and technology, Abdelhamid Ibn Badis University, Mostaganem, Algeria
-
Krutika Routray
Department of Physics, C. V. Raman Global University, Bhubaneswar, India
-
Jun Xia
School of Materials Science and Engineering, Beihang University, Beijing, China
-
Y. Ashok Kumar Reddy
Indian Institute of Information Technology, Design and Manufacturing, (IIITDM) Kancheepuram, Chennai, India
-
Qingguo Shao
School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao, China
-
Wanneng Ye
Department of Physics, Qingdao University, Qingdao, China
-
Chellasamy Velu
Center for Nanoscience and Technology, Pondicherry University, Pondicherry, India
-
Prof. Satish More, PhD
Department of Mechanical Engineering, Nutan Maharashtra Institute of Engineering and Technology, Talegaon, Pune, India
-
Aniruddh Jagdish Khanna
Applied Materials Inc., Sunnyvale, United States
-
Haijun He
College of Textile Science and Engineering, Jiangnan University, Wuxi, China
-
Maria Mathabathe
Department of Science and Technology, Council for Scientific and Industrial Research, Pretoria, South Africa
-
Dongmei Dong
Department of Physics and Astronomy, Rowan University, New Jersey, United States
-
Assist. Prof. Ali Hajjiah, PhD
Electrical Engineering Department, Kuwait University, Kuwait, Kuwait
